This cuff bracelet has been hammered to fold the sterling silver giving it a unique look.

The cuff bracelet has a hammered surface finish

It has an internal circumference of 6.5 inches (165.1 mm) – which includes the gap of 1 inch (25.4 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

Note: I can make this in almost any size you need. Contact me for custom sizing.

The width of the bracelet is 1 inch (25.4 mm) at the ends and 0.5 inch in the middle (12.7 mm).

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

It has an internal circumference of 6.25 inches (158.75 mm) – which includes the gap of 1 inch (25.4 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial – it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet has been pierced and then soldered to another piece of stering silver to give it a polka dot appearance. It was then hammered.

It has been oxidized to bring out the details of the hammering and the polka dots. Finally most of the oxidation has been removed from the surface to bring out the dimples giving it a great artisan finish, it is quite unique.

It has a circumference of 6.5 inch (165 mm) – which includes the gap of 1 inch (25.4). The width of the bracelet is ~1 inch (25.4 mm) in the center tapering down to 0.5 inch (12.7 mm) on the ends.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

I would call this bracelet an “average size” for women, a “small size” for men.

This cuff bracelet is highly hammered to give the bracelet a great artisan textured finish.

The cuff bracelet has a matte finish

It has a circumference of 7 inch (178 mm) – which includes the gap of 1 inch. The width of the bracelet is 1 inch (25.4 mm).

Note: I can make this in almost any size you need. The measurements above are for what I would call an “average wrist” – if you need something different please contact me and we can talk about what you have in mind.

The bracelet is chunky, it is made from 18 gauge reclaimed sterling silver sheet.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The outside of this cuff bracelet has been hammered to give the bracelet a great artisan textured finish.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet is domed on the outside and flat on the inside.

I will custom make the bracelet to order for you.

The cuff bracelet has been hammered to add surface appeal.

The photos show the bracelet with a matte, satin finish. I can also make the bracelet in a shiny finish – just leave a note in the note to seller.

The width of the bracelet is 0.47 inch (12 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

Note: If you do not see this in the size you need contact me, I can make it in almost any size for your individual wrist.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

Sleek modern cuff bracelet for men or women.

This cuff bracelet has been pierced with a jeweler’s saw to give a wave like appearance. The waves, along with the highly polished surface, give the cuff an liquid metal look.

The outside is highly polished and the inside has a matte finish.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you.

Note: I can make this in almost any size you need. Contact me for custom sizing.

It has an internal circumference of 7″ which includes the gap of 1″ The width of the band is 1″. The bracelet is chunky, it is made from 18 gauge sterling silver sheet.

I would call this bracelet a Women’s Large or Men’s Average size – it adjusts a bit either way.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This handmade cuff bracelet begins as a flat sheet of sterling silver that has been hammered into shape, scribed with a motif of ginkgo leaves and polished.

The bracelet has a polished finish and the leaves are scribed into the metal.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you.

The cuff has an internal circumference of 6.75″ which includes the gap of one inch. The bracelet is one inch wide. This would be a standard size bracelet that can be adjusted a bit.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

This is a chunky, substantial cuff – made from 18 gauge sterling silver sheet. It has a nice weight and feel to it.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet is domed on the outside and flat on the inside.

The cuff bracelet has been hammered to added surface appeal. This one has a polished finish. It is also available in a satin finished. Please contact me if you would prefer a satin finish

The width of the bracelet is 0.315 inch (8 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

Note: If you do not see this in the size you need contact me, I can make it in almost any size for your individual wrist.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The bracelet is sleek and modern.

This cuff begins as a flat sheet of sterling silver that has been hammered into shape, scribed with butterflies and polished.

The bracelet has a mirror finish.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

This is a chunky, substantial cuff – made from 18 gauge sterling silver sheet. It has a nice weight to it.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

I work with reclaimed sterling silver.