This cuff was made by melting silver on top of copper, it produces a very nice organic look. The surface of the silver looks like the surface of the moon.

The bracelet has an internal circumference of 7.0 inches (177.8 mm) – which includes the gap of 1 inch (25.4 mm).

The width of the bracelet is 1.5 inch (38 mm).

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

A classic minimal cuff for men or women. The cuff bracelet has been oxidized and then the oxidation almost totally removed to give it a nice muted matte finish.

The cuff bracelet is 0.625 inch (15.875 mm) wide with an extra band of sterling silver soldier to the top. It has an internal circumference of 7 inches (178 mm) – which includes the gap of 1 inch (25.4 mm).

I can make this cuff in almost any size just contact me with your requirements.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This sterling silver cuff has been sawed and the metal folded inward. It is held together with 18K gold rivets to give it a unique art metal appeal.

The cuff has been given a matte finish.

The cuff is 7.25 inches (184 mm) – which includes the gap of 1.25 inch (31.75 mm). It is 0.75 inch (19.05 mm) inches wide at the ends and 1 inch (25.4 mm) wide in the center.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

I work with eco friendly reclaimed metals.

Sleek modern cuff bracelet for men or women.

This cuff bracelet has been made from two pieces of sterling silver sheet. One piece has waves with the highly polished surface, The other piece is a nice chunky sterling silver base with a diamond bur finish.

It has an internal circumference of 7″ which includes the gap of 1″ The width of the band is 0.4 inch (10mm). The bracelet is nice and chunky.

An oxidized version can be seen here wave-cuff-oxidized.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The cuff bracelet is made from reclaimed sterling silver.

This bracelet is domed on the outside and flat on the inside.

The cuff bracelet has a hammered finish. I have oxidized the bracelet to a deep, steel grey.

The oxidized patina will wear away as the bracelet is worn – there are ways to restore the finish and/or it looks great as the patina fades with wear.

The width of the bracelet is 0.47 inch (12 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

Note: If you do not see this in the size you need contact me, I can make it in almost any size for your individual wrist.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet has been pierced and then soldered to another piece of stering silver to give it a polka dot appearance. It was then hammered.

It has been oxidized to bring out the details of the hammering and the polka dots. Finally most of the oxidation has been removed from the surface to bring out the dimples giving it a great artisan finish, it is quite unique.

It has a circumference of 6.5 inch (165 mm) – which includes the gap of 1 inch (25.4). The width of the bracelet is ~1 inch (25.4 mm) in the center tapering down to 0.5 inch (12.7 mm) on the ends.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

I would call this bracelet an “average size” for women, a “small size” for men.

This cuff bracelet is highly hammered to give the bracelet a great artisan textured finish.

The cuff bracelet has a matte finish

It has a circumference of 7 inch (178 mm) – which includes the gap of 1 inch. The width of the bracelet is 1 inch (25.4 mm).

Note: I can make this in almost any size you need. The measurements above are for what I would call an “average wrist” – if you need something different please contact me and we can talk about what you have in mind.

The bracelet is chunky, it is made from 18 gauge reclaimed sterling silver sheet.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The outside of this cuff bracelet has been hammered to give the bracelet a great artisan textured finish.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The bracelet has a high shiny finish with great artisan texture.

I will custom make your cuff bracelet to order – it usually takes 1 to 2 weeks before it is ready for shipment. Sometimes I can get things done sooner. Each one will be a tiny bit different – the way of handcrafted, artisan jewelry.

The bracelet has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 1 inch (25.4 mm).

The cuff bracelet has nice weight to it. I begin with 18 gauge reclaimed sterling silver sheets of metal (corresponding to 1.5 mm thickness).

Note: I can make this in almost any size you need. The measurements above are for what I would call an “average wrist” – if you need something different please contact me and we can talk about what you have in mind.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The outside of this cuff bracelet has been hammered to give the bracelet a great artisan textured finish.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.