Each bangle bracelet is hand crafted from thick sterling silver round wire that has been soldered and hand textured with files, hammers or both to give each a unique appearance.

These bangles are a Size med/large with a 2.5 inch (63.5 mm) inside diameter.

I can also custom make them for your size, the very beginning of this video shows how to measure to get the proper size bangle for your wrist: https://www.youtube.com/watch?v=muUWDOrH8CI&t=121s

The bangles are substantial, they are made from 10 gauge round sterling silver wire.

Simple and elegant, perfect for dressing up or dressing down.

This listing is for a set of four bangles, as I feel you can’t just have one, they wouldn’t jingle.

Sleek modern cuff bracelet for men or women.

This cuff bracelet has been made from two pieces of sterling silver sheet. One piece has waves with the highly polished surface, The other piece is a nice chunky sterling silver base with a diamond bur finish.

It has an internal circumference of 7″ which includes the gap of 1″ The width of the band is 0.4 inch (10mm). The bracelet is nice and chunky.

An oxidized version can be seen here wave-cuff-oxidized.

The cuff can be *slightly* adjusted by *gently* squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The cuff bracelet is made from reclaimed sterling silver.

This bracelet is domed on the outside and flat on the inside.

The cuff bracelet has a hammered finish. I have oxidized the bracelet to a deep, steel grey.

The oxidized patina will wear away as the bracelet is worn – there are ways to restore the finish and/or it looks great as the patina fades with wear.

The width of the bracelet is 0.47 inch (12 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

Note: If you do not see this in the size you need contact me, I can make it in almost any size for your individual wrist.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet has been pierced and then soldered to another piece of stering silver to give it a polka dot appearance. It was then hammered.

It has been oxidized to bring out the details of the hammering and the polka dots. Finally most of the oxidation has been removed from the surface to bring out the dimples giving it a great artisan finish, it is quite unique.

It has a circumference of 6.5 inch (165 mm) – which includes the gap of 1 inch (25.4). The width of the bracelet is ~1 inch (25.4 mm) in the center tapering down to 0.5 inch (12.7 mm) on the ends.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

I would call this bracelet an “average size” for women, a “small size” for men.

This cuff bracelet is highly hammered to give the bracelet a great artisan textured finish.

The cuff bracelet has a matte finish

It has a circumference of 7 inch (178 mm) – which includes the gap of 1 inch. The width of the bracelet is 1 inch (25.4 mm).

Note: I can make this in almost any size you need. The measurements above are for what I would call an “average wrist” – if you need something different please contact me and we can talk about what you have in mind.

The bracelet is chunky, it is made from 18 gauge reclaimed sterling silver sheet.

The cuff can be adjusted a bit by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The outside of this cuff bracelet has been hammered to give the bracelet a great artisan textured finish.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

The outside of this cuff bracelet has been hammered to give the bracelet a great artisan textured finish.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1.25 inch (31.75 mm). The width of the bracelet is 0.4 inch (10 mm).

The cuff bracelet is substantial it is made from 14 gauge reclaimed sterling silver sheet corresponding to 1.5 mm thickness.

Note: I can make this in almost any size you need. Contact me for custom orders, thanks.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet is domed on the inside and flat on the outside. The inside dome gives this bracelet a very nice comfortable feel and fit.

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

This cuff bracelet has satin finish.

I can also make this in a highly polished finish just contact me.

The width of the bracelet is 0.315 inch (8 mm).

Note: If you do not see this in the size you need contact me, I can make it in almost any size for your individual wrist.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

This cuff bracelet is domed on the inside and flat on the outside. The inside dome gives this bracelet a very nice comfortable feel and fit.

The width of the bracelet is 0.47 inch (12 mm).

The bracelet will be custom made to order – usually takes me 1 to 2 weeks before I ship to you. Contact me if you need it sooner it is usually possible to get this in the mail in a shorter time frame.

This cuff bracelet has satin finish.

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.

It has an internal circumference of 7.0 inches (178 mm) – which includes the gap of 1 inch (25.4 mm). The width of the bracelet is 0.47 inch (12 mm). The cuff is slightly domed on the outside.

The Lapis cabochon is 0.9 mm X 0.6 mm 1.2 CT

The cuff can be adjusted by squeezing or stretching the sides to conform to your individual wrist. Please ask if you have any questions about sizing.